Watering Timer – Two-Dial Hose End Timer

Increase Efficiency with Watering Timers

Simple and reliable, this battery operated controller and timer help to streamline your irrigation needs. This kits runs a higher flow rate at lower inlet pressures.

The timer has up to four start times per day with a two minute to four hour programming duration and an operating flow range of .1 to 6.3 gallons per minute for use in a wide range of applications, including drip irrigation or micro sprinkler systems connected to a garden hose or faucet/spigot. It uses one 9-volt alkaline battery that can last for up to one year.

Features:

3/4” FHT inlet and MHT outlet

Watering duration from 2 minutes to 240 minutes

Eight watering intervals ranging from every six hours to once per week

Low battery auto lock out to ensure the timer cannot open unless it can close

Low energy use (less than 20 micro amps in standby mode) ensures long battery life

Easy manual operations using a single button

High water flow at normal water pressures

Operates on low water flows of less than 0.5 GPM

14% of higher flow at 30 PSI

High strength female hose thread connection with easy removal via spring clip

Powered by one 9-volt alkaline battery with battery life up to one year

Weather resistant

Three year limited warranty

Product Specifications

Flow rate up to 6.3 GPM at 30 PSI (24 L/PM at 2 Bar)

Temperature range: 40°F to 125° F (3° C to 50° C)

Operating pressure 10 PSI to 80 PSI (0.6 – 5.5 Bar)

Power source: 9-volt alkaline battery (not included)

Solenoid: durable electric motor

Power consumption 20 micro amps in standby mode.

Materials: body ABS and inner parts of high-impact plastic

Dimensions: 6” D X 4” W x 6.5” H ( 15.2 cm X 10.0 cm X 16.2 cm)

Programming options

Eight pre-set watering durations from 2 minutes to 240 minutes

Watering frequency: eight watering intervals ranging from every six hours to once per week